Plug-in terminals for through-wiring, max. 2.5 mm²
Luminaire pre-wired using halogen-free leads
Polycarbonate lens
Optimum thermal management via heat sink
Strain relief at both ends (mains connection and cable to LED module)
LED emergency luminaire for emergency lighting in accordance with EN 1838, UNI EN 50172 and NFPA 101
Flat, discreet and elegant design
Wall recessed luminaire for 68 mm wall cutout and wall thicknesses of 1-25 mm
Trim of diecast aluminium, powder-coated white similar to RAL 9016;
gearbox for installation in ceiling recess made of polypropylene (PP)
Tool-free rapid mounting of the luminaire via specially shaped spring clips
Tool-free battery replacement
2 high power LEDs, neutral white 4,000 K
Escape Wall optic for escape route lighting from the wall
NFC interface for address-setting, configuration and maintenance via PROset Pen (article no.: 22170290) or PROset App
Non-maintained and maintained mode settable via jumper and NFC interface
Light level in mains operation settable from 15% to 100%
E1D, E3D and E8D: Luminaire with local battery supply for 1, 3 or 8 hour emergency lighting in maintained or non-maintained mode, with automatic test (auto-test) via the luminaire, optional central monitoring via DALI
Display of luminaire status via status LED
Installed loads:
E1D = 4.7 W, HC E1D = 6.7 W, HP E1D = 8.2 W
E3D = 4.7 W, HC E3D = 7.1 W, HP E3D = 8.2 W
E8D = 5.5 W
ECC = 3.8 W, HC ECC = 4.4 W, HP ECC = 7.2 W
ECD = 3.9 W, HC ECD = 4.5 W, HP ECD = 7.2 W
ECP = 3.8 W, HC ECP = 4.5 W, HP ECP = 7.5 W
E1D, E3D and E8D mains connection: 220-240 V AC, 50/60 Hz